nearby the Fridge - Cabinet building

To give our kitchens a more spirited and pleasing, we can add more storehouse areas to it. Cabinets are the most notices part of every kitchen. Actually, it is the one that gives life into the entire kitchen. A cabinet colse to the fridge will be a exquisite one to have. It will generate a more classy yet elegant look into our kitchens. We can generate this with just a few easy procedures:

First, we need to supply all the materials that we will need. These are:

33 Inch Wide French Door Refrigerators

· Flexible measuring tape
· Molding
· Wood screws
· Drill
· Stain
· finished plywood
· 1/4 inch wood for the backing
· Cabinet door hinges

After conference and establishment all the materials, we now go to the building of our colse to the fridge cabinet. At first, it will seem a bit complex for we know that colse to the fridge have lots of separate measurements. This is the main task on this project: to portion properly. We need to make sure that all will fit into their proper places or else we have to do it from the start again.

First we will portion the size of the fridge. Depends on how wide our fridge is. Typical refrigerators have a 30-inche wide body. The duplicate door ones are 36 inches wide. We need to make sure that we will not damage our fridge once we already have our cabinets colse to it. We need to pay attentiveness on the hinges and the doors of the cabinets goes with the doors of the fridge. Once we are occasion and windup them, none of each should touch each other.

We also need to conclude the depth of the cabinet should be. If we want it to the same as with the fridge or if it will exceed a little, we need to get the exact measurements that we want. We also need to conclude how much clearance we want on each side. The recommended clearance is 5/4 to 1 inch clearance.

Choosing the wood will depend on what we have for the rest of the kitchen cabinets. It should match with the others in the kitchen. If we use used easy plywood with the existing cabinets, then that is the exact same wood we should use for our fridge cabinets.

After all the deciding, we now go to the building of the cabinets. The only difficult part of this is the measurements before the cutting. We need to make sure that we measured all correctly before the final cutting. Then we go to the fun part which is putting all the parts together.

If they are assembled together, we can now desist our colse to the fridge cabinets by finishing them with either paint or stain, also depending on what colors we have with our existing cabinets.

After that we can now slide the cabinets colse to our fridge and enjoy our new kitchen look.

nearby the Fridge - Cabinet building

ge french door refrigerator linksys wusb300n